|
Clients spec'ing cutaway custom built busses, are requiring
extreme 12 volt power for their heavy duty
applications and extensive overhead loads, in some
cases over 130 amps at idle. Stock OE
chassis 12 volt power supplies can't even come close.
Increase your build performance for your customers by installing an APS
Heavy Duty Alternator. Now standard spec on most DOTs and OE custom body builders.
APS
regulators with PCM control for Ford Smart Charging ®
are an option for 2009. The APS unit will mount directly onto the OE or aftermarket
bracket and into the OE harness
plug. All of our
heavy duty alternators have an internal regulator. No brackets, cut wiring or separate wiring
harnesses are required.
Upgraded output and ground wires are
required due to higher power output.
Cross Reference to Penntex, Powerline or Lestek
Alternators
Find the correct pulley
for your vehicle
|